2-1/4" Modular Thin Brick & Corner

Thin Brick are available in almost every size manufactured by Interstate.  Currently, thin brick are made by saw cutting full thickness brick.  The advantage on a job that uses full thickness brick is that all of the brick can be made from a single batch. Some of Interstate’s brick are made in a way that two faces are cut from a single brick.  Others are not.  The obvious advantage is cost.  Corner brick are cut from a single brick and only one corner is obtained from a brick.  Contact one of our customer service managers to find out more about our thin brick line.

2-1/4" x 7-5/8" - Flat Piece

3-5/8" x 2-1/4" x 7-5/8" - Corner Piece

Click here for brick specifications.

Product thickness is dependent on the manufaturing process used to produce the thin brick; face cut, spit-tile, break-a-way, clusters, and ribbons have different thicknesses. Set thicknesses are 5/8", 7/8" and 1" [nominal] (16mm, 22mm, and 25mm [nominal])