2-3/4" Modular Thin Brick & Corner
Thin Brick are available in almost every size manufactured by Interstate. Currently, thin brick are made by saw cutting full thickness brick. The advantage on a job that uses full thickness brick is that all of the brick can be made from a single batch. Some of Interstate’s brick are made in a way that two faces are cut from a single brick. Others are not. The obvious advantage is cost. Corner brick are cut from a single brick and only one corner is obtained from a brick. Contact one of our customer service managers to find out more about our thin brick line.
2-3/4" x 7-5/8" - Flat Piece
3-5/8" x 2-3/4" x 7-5/8" - Corner
Click here for specifications.
Product thickness is dependent on the manufaturing process used to produce the thin brick; face cut, spit-tile, break-a-way, clusters, and ribbons have different thicknesses. Set thicknesses are 5/8", 7/8" and 1" [nominal] (16mm, 22mm, and 25mm [nominal])
Click on any of the colors below to see details and project photos:
*We cannot guarantee that your monitor's display of any color will be accurate. Please contact us to request a sample.
%2 Image Gallery
There are no %2 projects in the gallery at this time.